Esc [F2] [04] [00] Position Stamp Set - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.25 ESC [F2] [04] [00]
[Name] Position Stamp Set
[Function] This command sets a position stamp for the current position.
16
[Code] [1B]
10
[27]
[Description]
1. The command "ESC [F2] [04] [00]" sets a position stamp of the current position. This position
stamp is used as a reference position for subsequent commands, such as Position Stamp Feed
or Position Stamp Retract.
2. Buffered print data will be printed before the printer processes this command.
3. The Position Stamp Set command must be placed at the start of the printout. The command will
interrupt fluent printout if placed elsewhere.
Part No. D 684 112
16 16
+ [F2] + [04] + [00]
10 10
+ [242] + [4] + [0]
Mod.Nr. 4 150813 LEV
Position Stamp Set
16
10
Page 36 of 95