Esc '-'+[N] Character Underlining - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.14 ESC '-'+[n]
[Name] Character underlining
[Function] This command turns character underlining on and off, and specifies the number of
dot rows to be used when underlining a character.
16
[Code] [1B]
10
[27]
[Description]
1. The "ESC '-'+[n]" command controls character underlining and the number of dot rows used for
the underline.
2. Parameter [n] specifies the number of dot rows to be used when underlining.
10
3. Condition [0] ≤ [n] ≤ [3]
underlining.
4. The default value for [n] is [0]
5. Underlining remains in effect until a subsequent underline command changes the value.
6. It is possible to mix underlining on a single line. For example, part of the line can be underlined
with three dot rows, part with two, part with one, and part with none.
Part No. D 684 112
16
+ [2D] + [n]
10
+ [45] + [n]
10
must be satisfied; I.E., a maximum of three dot rows can be used for
10
(no underlining).
Mod.Nr. 4 150813 LEV
Character underlining
Page 22 of 95