Esc [F1]+[01]+[11]+[06]+[M1] - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.55 ESC [F1]+[01]+[11]+[06]+[m1]..[m16] Customer Part
[Name] Customer part number specification
[Function] This command is used to specify a customer part number up to 16 characters long.
16
[Code] [1B]
10
[27]
[Description]
1. The "ESC [F1]+[01]+[11]+[06]+[m1]..[m16]" command specifies an alphanumeric customer-
specified part number.
2. The customer-specified part number may be up to 16 alphanumeric characters long. The values
of [m1] to [m16] should be printable ASCII characters, with the exception of the null character
16
[0] . The part number must have a following ASCII null character (e.g. [0]
then 16 characters. If the first character [m1] is a null character, then the customer-specified part
number is treated as undefined.
3. If defined, then the eXtendo
®
into the eXtendo , and transmits it in the Status Packets (see command "GS a + [n]", Request
Printer Status).
4. The customer-specified part number is stored in flash memory and is printed with the header data
every time the header data is printed.
Part No. D 684 112
16 16
+ [F1] + [01] + [11]
10 10
+ [241] + [01] + [17]
®
prints the customer-specified part number when paper is inserted
Mod.Nr. 4 150813 LEV
Number Specification
16 16
+ [06] + [m1]
10 10
+ [06] + [m1]
16
) if its length is less
... [m16]
... [m16]
Page 75 of 95