Esc '%'+[N] Character Set And Country Code Selection - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.18 ESC '%'+[n]
[Name] Character Set and Country Code Selection
[Function] This command selects the character set and the country code.
16
[Code] [1B]
10
[27]
[Description]
1. Command "ESC '%' [n]" selects the primary or secondary character set and the country code
within this character set.
2. Either character set can be changed by uploading a new character set to the printer using the
supplied font upload tool.
3. Parameter [n] specifies character set and country code. The following figure shows the
relationship between the bits of parameter [n] and character set and country code:
Parameter [n], bit
(LSB)
b0 – b2
2 – 7
b3 – b7
(MSB)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 - 31
4. The country code characters are available from firmware version R2-V1.01f and later.
Part No. D 684 112
16
+ [25] + [n]
10
+ [37] + [n]
Value
0
1
Reserved for future use
Country code disabled (default)
USA
France
Germany
U.K.
Denmark 1
Sweden
Italy
Spain 1
Japan 1
Norway
Denmark 2
Spain 2
Latin America
Japan 2
Reserved for future use
Mod.Nr. 4 150813 LEV
Character Set and Country
Code Selection
Printing mode
Primary character set (default)
Secondary character set
Page 26 of 95