Gs W+[N] Bar Code Width Magnification Setting - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.39 GS w+[n]
[Name] Bar code width magnification setting
[Function] This command sets the width magnification for a bar code.
16
[Code] [1D]
10
[29]
[Description]
1. Command "GS w+[n]" specifies the width magnification of a one-dimensional bar code by
multiplying the dot width of the narrow and wide bars by a specified integer value.
2. Parameter [n] specifies the horizontal magnification of a bar code.
3. The following conditions must be satisfied:
10
[1] ≤ [n] ≤ [4]
4. The default value of parameter [n] is [1]
5. The widths of the narrow and wide bars (black and white) are multiplied by [n].
6. This command is ignored two-dimensional bar codes.
Part No. D 684 112
16
+ [77] + [n]
10
+ [109] + [n]
10
.
10
.
Mod.Nr. 4 150813 LEV
Bar code width magnification
setting
Page 50 of 95