Gs H+[N] Bar Code Height Setting - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.38 GS h+[n]
[Name] Bar code height setting
[Function] This command sets the height of a bar code in dots.
16
[Code] [1D]
10
[29]
[Description]
1. Command "GS h+[n]" defines the height of a bar code.
2. Parameter [n] specifies the height of the bar code in dots.
3. The following conditions must be satisfied:
10
[1] ≤ [n] ≤ [255]
4. The default value of parameter [n] is [60]
Part No. D 684 112
16
+ [68] + [n]
10
+ [104] + [n]
10
.
10
.
Mod.Nr. 4 150813 LEV
Bar code height setting
Page 49 of 95