Esc A [N] Horizontal Alignment Command - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.29 ESC a [n]
[Name] Horizontal Alignment Command
[Function] This command is used to set the alignment mode for printing objects such as text,
wide text, bitmaps, images and barcodes.
[Code]
16
[1B]
10
[27]
[Description]
1. Command "ESC a [n]" is used for setting the alignment mode for printing objects such as text,
wide text, bitmaps, images and barcodes.
2. Parameter [n] defines the alignment setting, as follows:
0 Left alignment
1 Center alignment
2 Right alignment
3. The horizontal alignment setting will automatically reset the current reference position to the left,
center or right of the paper.
4. The set position command "ESC '$' [n1] [n2] [m1] [m2]" can be used to align one or more objects
in relation to this reference position.
5. The default horizontal alignment setting is left.
6. The horizontal alignment setting has no influence on graphic printing.
Part No. D 684 112
Horizontal Alignment Command
16
+ [61] + [n]
10
+ [97] + [n]
- Paper left + left margin
- Paper center
- Paper right.
Mod.Nr. 4 150813 LEV Page 40 of 95