Esc [F2] [06] [02] [N1] [N2] Position Stamp Retract - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.27

ESC [F2] [06] [02] [n1] [n2] Position Stamp Retract

[Name] Position Stamp Retract
[Function] This command feeds paper backwards to an offset relative to the last Position
Stamp Set position.
[Code]
16
[1B]
10
[27]
[Description]
1. The command "ESC [F2] [06] [02] [n1] [n2]" feeds paper backwards to an offset relative to the last
Position Stamp Set position.
2. Parameters [n1] and [n2] specify a target position in millimeters from the last Position Stamp Set
location. Together they form a 16-bit, unsigned integer with a valid range up to 65,535.
Parameter [n1] is the MSB and parameter [n2] is the LSB of this number.
10
3. The conditions [0] ≤ [n1] ≤ [255]
4. Buffered print data will be printed before the printer processes this command.
5. By using the "Position Stamp Set" command at the start of a printout and the "Position Stamp
Retract" command at the end of the printout, an application is able to retract the paper to the start
of the printout and invalidate it afterwards by overprinting it (E.G., by printing "VOID" on the
printout).
Part No. D 684 112
16 16
+ [F2] + [06] + [02]
10 10
+ [242] + [6] + [2]
10 10
and [0] ≤ [n2] ≤ [255]
Mod.Nr. 4 150813 LEV
16
+ [n1] + [n2]
10
+ [n1] + [n2]
10
must be satisfied.
Page 38 of 95