Gs E+[N]+[M] Bar Code Bar Width Setting - Hengstler eXtendo X-56 Reference Manual

®
eXtendo Emulation Command Set Reference
2.1.37 GS e+[n]+[m]
[Name] Bar code bar width setting
[Function] This command sets the width of the bar code narrow and wide bars.
16
[Code] [1D]
10
[29]
[Description]
1. Command "GS e+[n]+[m]" defines the width of the bar code bars.
2. The bars in a one-dimensional bar code can be wide or narrow and black or white.
NARROW BLACK BAR
NARROW WHITE BAR
WIDE BLACK BAR
WIDE WHITE BAR
3. Parameter [n] specifies the width of a narrow white/black bar in dots.
4. Parameter [m] specifies the width of a wide white/black bar in dots.
5. When the bar code selected does not consist of wide bars and/or narrow bars, the value of
parameter [n] is set as the minimum width.
6. The initial value of parameter [n] is [2]
7. The initial value of Parameter [m] is [6]
8. The following conditions must be satisfied:
10
[1] ≤ [n] ≤ [255]
Part No. D 684 112
16
+ [65] + [n] + [m]
10
+ [101] + [n] + [m]
parameter „n"
parameter „n"
parameter „m
n"
parameter „m
n"
10
.
10
.
10 10
and [1] ≤ [m] ≤ [255]
Mod.Nr. 4 150813 LEV
Bar code bar width setting
10
Page 48 of 95