Installation; Thermostat; Removal - Suzuki GSX-R750 Service Manual

Hide thumbs Also See for GSX-R750:

Table of Contents

INSTALLATION

• Tighten the engine coolant temperature sensor to the specified

! Engine coolant temperature sensor: 18 N . m

Take special care when handling the temperature sen-

sor. It may cause damage if it gets a sharp impact.

• Install the throttle body.

• Install the air cleaner box.

• Install the fuel tank. (4-51)

• Install the front and rear seats. (6-8)

• Pour engine coolant. (2-18)

• Install the under cowling. (6-5)

• Remove the under cowling. (6-5)

• Drain engine coolant. (2-18)

• Remove the front and rear seats. (6-8)

• Lift and support the fuel tank. (4-51)

• Remove the air cleaner box. (4-60 and -61)

• Remove the throttle body. (4-61 and -62)

• Remove the thermostat case.

• Remove the thermostat 1.

(1.8 kgf . m, 13.0 lb-ft)

COOLING AND LUBRICATION SYSTEM 5-9

Table of Contents