Suzuki GSX-R750 Service Manual page 305

6-54 CHASSIS
INSPECTION AND DISASSEMBLY
SPACER
• Remove the spacers from swingarm.
• Remove the spacers from the cushion lever.
• Inspect the spacers for any flaws or other damage. If any de-
fects are found, replace the spacers with new ones.
SWINGARM BEARING
Insert the spacer into bearing and check the play when moving
the spacer up and down.
If excessive play is noted, replace the bearing with a new one.
• Draw out the swingarm pivot bearings 1 and the swingarm
cushion rod upper bearings 2 with the special tools.
[ [ 09921-20220: Bearing remover set [ [ [
#
The removed bearings must be replaced with new ones.