Suzuki GSX-R750 Service Manual page 67

CLUTCH
• Remove the clutch cover.
• Hold the clutch housing with the special tool.
#
Do not damage the clutch plates by the special tool.
[ 09920-53740: Clutch sleeve hub holder [ [ [ [
• Remove the clutch springs.
NOTE:
Loosen the clutch spring set bolts little by little and diagonally.
• Remove the pressure plate and clutch plates.
• Remove the clutch push piece 1, the bearing 2 and the thrust
washer 3.
• Remove the clutch push rod 4.
NOTE:
If it is difficult to pull out the push rod 4 , use a magnetic hand or
a wire.
ENGINE 3-19