Suzuki GSX-R750 Service Manual page 107

Hide thumbs Also See for GSX-R750:

Table of Contents

Installation

• Fit the new O-rings 1 to each piston cooling oil jet as shown

and apply engine oil to them.

Use the new O-rings to prevent oil pressure down.

Be sure to face the oil holes A on each piston cooling oil jet to

the top when installing them.

• Install each piston cooling oil jet with the bolts.

Apply a small quantity of THREAD LOCK "1342" to the bolts and

tighten them to the specified torque.

I 99000-32050: THREAD LOCK "1342"

! Piston cooling oil jet bolt: 10 N . m (1.0 kgf . m, 7.0 lb-ft)

• Install the oil jets (for transmission).

• Install the each plugs.

! 1Water jacket plug: 9.5 N . m (0.95 kgf . m, 6.9 lb-ft)

2Oil gallery plug (lower crankcase):

Apply the engine coolant to the O-ring.

35 N . m (3.5 kgf . m, 25.3 lb-ft)

Chapters

Table of Contents