• When remounting the brake master cylinder onto the handle-
bar, align the master cylinder holder's mating surface with
punched mark A on the handlebar and tighten the upper clamp
bolt first as shown.
! Front brake master cylinder mounting bolt: 10 N . m
!
!
!
!
• Tighten the union bolt. (Brake hose routing: 8-20)
! Brake hose union bolt: 23 N . m (2.3 kgf . m, 16.5 lb-ft)
!
!
!
!
• Bleed air from the brake system. ( 2-22)
INSPECTION AFTER REASSEMBLY
• Front brake: 2-22
(1.0 kgf . m, 7.0 lb-ft)
Master cylinder
Handlebars
Upper
clamp
bolt
"UP"mark
Clearance
CHASSIS 6-67
Punched
mark