Suzuki GSX-R750 Service Manual page 277

6-26 CHASSIS
• Install the front fork cap bolt to the outer tube temporarily.
• Set the upper surface of the outer tube at 4.0 mm (0.16 in)
height A from the upper surface of the steering stem upper
bracket and tighten the front fork lower clamp bolts to the speci-
fied torque.
! Front fork lower clamp bolt: 23 N . m (2.3 kgf . m, 16.5 lb-ft)
• Tighten the front fork cap bolt to the specified torque and re-
check the front fork outer tube upper surface height A from
the upper surface of the steering stem upper bracket.
! Front fork cap bolt: 35 N . m (3.5 kgf . m, 25.5 lb-ft)
• Tighten the front fork upper clamp bolts and handlebar clamp
bolts.
! Front fork upper clamp bolt: 23 N . m (2.3 kgf . m, 16.5 lb-ft)
Handlebar clamp bolt: 23 N . m (2.3 kgf . m, 16.5 lb-ft)
NOTE:
Before tightening the two axle pinch bolts on right front fork leg,
move the front fork up and down 4 or 5 times.