Suzuki GSX-R750 Service Manual page 66

3-18 ENGINE
• Remove the intake camshaft 1.
• Remove the exhaust camshaft 2.
CYLINDER HEAD
• Remove the water hose 1.
• Remove the thermostat cover 2 and thermostat.
THERMOSTAT INSPECTION: 5-9
• Remove the engine coolant temp. gauge 3.
ENGINE COOLANT TEMP. GAUGE INSPECTION: 5-8
• Remove the cylinder head side bolt 4 and its gasket.
#
When removing the cylinder head side bolt, pull the cam
chain upward, or the chain will be caught between the
cylinder head and the side bolt.
• Remove the cylinder head bolts (M6) 5.
• Remove the cylinder head bolts and washers.
NOTE:
When loosening the cylinder head bolts, loosen each bolt little
by little diagonally.
• Remove the cylinder head.