Suzuki GSX-R750 Service Manual page 125

OIL PRESSURE SWITCH
• Apply SUZUKI BOND "1207B" to the thread part of the oil pres-
sure switch 1 and tighten it to the specified torque.
C 99104-31140: SUZUKI BOND "1207B"
! Oil pressure switch: 14 N . m (1.4 kgf . m, 10.0 lb-ft)
NOTE:
Be careful not to apply SUZUKI BOND "1207B" to the hole of the
thread end.
OIL COOLER
• Apply the grease to the O-ring.
W 99000-25030: SUZUKI SUPER GREASE "A"
#
Use the new O-ring to prevent oil leakage.
• Install the oil cooler as shown.
! Oil cooler bolt: 10 N . m (1.0 kgf . m, 7.0 lb-ft)
OIL FILTER
• Install the oil filter using the special tool. ( 2-14)
[ 09915-40610: Oil filter wrench [ [ [ [
ENGINE 3-77