6-20 CHASSIS
• Remove the inner rod/damper rod (cartridge) 1 and plate 2.
#
Do not disassemble the inner rod/damper rod (cartridge).
• Remove the dust seal 3 and the oil seal stopper ring 4.
• Extract the outer tube from the inner tube.
NOTE:
Be careful not to damage the inner tube.
#
The "ANTI-FRICTION" metals, oil seals and dust seals
must be replaced with new ones, when reassembling
the front forks.
• Remove the following parts.
1 Dust seal
2 Oil seal stopper ring
3 Oil seal
4 Oil seal retainer
5 Anti-friction metal (Outer tube)
6 Anti-friction metal (Inner tube)
• Remove the compression damping force adjuster.
NOTE:
Never disassemble the compression damping force adjuster.