Suzuki GSX-R750 Service Manual page 116

3-68 ENGINE
der walls.
• Install the pistons and conrods into the cylinders from upside.
NOTE:
When installing the pistons, the indent A of the piston head must
be faced to each exhaust side.
#
Be carefull not to damage the cylinder wall by the conrod.
• Check that ID code B on the each conrods faces toward intake
side.
#
Be sure to clean the conrod big end.
• Apply molybdenum oil solution to the crank pin bearings sur-
face.
O MOLYBDENUM OIL SOLUTION
CRANKSHAFT
• Apply molybdenum oil solution to each crankshaft journal bear-