Suspension Setting - Suzuki GSX-R750 Service Manual

SUSPENSION SETTING

After installing the front fork, adjust the spring pre-load and damp-
ing force as follows.
SPRING PRE-LOAD ADJUSTMENT
There are seven grooved lines on the side of the spring ad-
juster. Position 0 provides the maximum spring pre-load and
position 7 provides the minimum spring pre-load.
(STD position: 4)
DAMPING FORCE ADJUSTMENT
(Rebound side)
Fully turn the damping force adjuster 1 clockwise. It is at stiffest
position and turn it out to standard setting position.
(STD position: 1 and · turns out [Fine-tune the adjuster by turn-
ing it slightly until two punch marks align.])
(Compression side)
Fully turn the damping force adjuster 2 clockwise. It is at stiffest
position and turn it out to standard setting position.
(STD position: 1 and · turns out [Fine-tune the adjuster by turn-
ing it slightly until two punch marks align.])
STANDARD FRONT SUSPENSION SETTING
Spring pre-load
adjuster
Softer
Solo
Standard
riding
Stiffer
Dual riding
"
Be sure to adjust the spring pre-load and damping force
on both front fork legs equally.
FRONT
Damping force adjuster
Rebound
1 and ¸ turns out 1 and ¸ turns out
4
1 and · turns out 1 and · turns out
4
º turn out
4
1 and · turns out 1 and · turns out
4
Rebound side
Compression
º turn out
Compression side
CHASSIS 6-27