Suzuki GSX-R750 Service Manual page 245

Hide thumbs Also See for GSX-R750:

Table of Contents

5-16 COOLING AND LUBRICATION SYSTEM

• Apply grease to the impeller shaft.

W 99000-25030: SUZUKI SUPER GREASE "A"

• Install the impeller shaft to the water pump body.

• Install the rubber seal 1 into the impeller.

• After wiping off the oily or greasy matter from the mechanical

seal ring, install it into the impeller.

The marked side A of the mechanical seal ring faces the impel-

• Install the seal washer and the washer onto the impeller secur-

The metal side B of the seal washer and the convex side C of

the washer face the impeller securing bolt head.

• Install the impeller 3 and its securing bolt 2 onto the shaft.

• Tighten the impeller securing bolt 2 to the specified torque.

! Impeller securing bolt: 8 N . m (0.8 kgf . m, 6.0 lb-ft)

Before installing the impeller securing bolt, apply a small quantity

of the THREAD LOCK "1342" to it.

I 99000-32050: THREAD LOCK "1342"

Chapters

Table of Contents