COMPRESSION DAMPING FORCE ADJUSTER
• Tighten the compression damping force adjuster to the speci-
fied torque.
! Compression damping force adjuster:
#
The removed O-ring must be replaced with a new one.
DAMPER ROD BOLT
Insert the inner rod/damper rod (cartridge) and the plate into
the inner tube and tighten the damper rod bolt to the specified
torque with a hexagon wrench.
! Damper rod bolt: 35 N . m (3.5 kgf . m, 25.5 lb-ft)
#
Use a new damper rod bolt gasket to prevent oil leak-
age.
NOTE:
If the damper rod turns with the damper rod bolt, hold the damper
rod with the special tool.
[ 09940-30221: Front fork assembling tool
18 N . m (1.8 kgf . m, 13.0 lb-ft)
CHASSIS 6-23