• Remove the swingarm pivot shaft lock nut by using the special
tool.
[ 09940-14970: Swingarm pivot thrust adjuster socket
[
[
[
[
wrench
• Hold the swingarm pivot shaft 1 with a 27 mm socket wrench
and remove the swingarm pivot nut 2 with a 36 mm socket
wrench.
• Remove the swingarm pivot shaft.
• Remove the rear suspension assembly.
• Remove the cushion rod.
• Remove the torque link.
• Remove the chain cover 1 and chain buffer 2 from the
swingarm.
• Remove the dust cover 3 and washer 4.
CHASSIS 6-53