Print Settings - 3D Systems Cube User Manual

Print Settings

Print Settings allow you to set the parameters of your print and build them into your print file. There are four (4) different options for
setting the print parameters .
Presets
• Draft
• Standard
• Premium
• Custom
Layers
• 0 .070 mm
• 0 .200 mm
Density
• Hollow
• Strong
• Almost Solid
Fill Pattern
• Honeycomb
• Diamonds
• Lines
3D Systems, Inc.
A
B
C
D
A print that does not require strength or fine details.
A strong print that does not require fine details.
A strong print that requires fine details.
Allows you to set the layer thickness, density, and fill pattern. You may also enable or disable
supports and rafts .
High quality prints
Shorter print time
Short print times and low material use
Stronger prints
High material use and almost solid prints
Used for strong prints
For general printing
Shorter print time
49