3D Systems Cube User Manual page 20

4 . Before installing cartridges, select the cartridge icon or select
process of installing your print cartridge .
NOTE: The printer will begin to heat . Wait until the printer has
finished heating and then follow the user prompts in the touchscreen
menu .
5 . Insert the print jet (from the cartridge that will be mounted on the left side of the
printer) into the left print jet opening on top of the printer .
6 . Rotate the print jet clockwise until the dots (A) align . Select the
continue
NOTE: As you rotate the print jet, ensure the print jet tube is tucked
under the top of the printer cover .
7 . Mount the cartridge on the left side of the printer and select the
continue .
NOTE: It may become necessary to slightly rotate the cartridge to
seat it properly .
3D Systems, Inc.
START to begin the
checkmark to
checkmark to
16
A