3D Systems Cube User Manual page 21

NOTE: The print jet will begin to heat . Once the print jet has reached
the proper temperature, the printer will prime melted material into
the refuse bin .
4 . The left cartridge has been installed . Select the
NOTE: The printer will begin to heat . Wait until the printer
has finished heating and then follow the user prompts in the
touchscreen menu .
5 . Insert the print jet (from the cartridge that will be mounted on the right side of the
printer) into the right print jet opening on top of the printer .
6 . Rotate the print jet clockwise until the dots align . Select the
continue .
NOTE: As you rotate the print jet, ensure the print jet tube is tucked
under the top of the printer cover .
3D Systems, Inc.
checkmark to continue .
checkmark to
17
A