3D Systems Cube User Manual page 105

NOTE: The printer will load the print file.
NOTE: The estimated time to completion is noted at the bottom of
the screen .
NOTE: The blue bar at the top is also a progress indicator that shows
the status of the loading process .
NOTE: The print jets will begin to heat .
CAUTION: Do not touch the print jets until they have cooled to room
temperature .
NOTE: The estimated time to completion is noted at the bottom of
the screen .
NOTE: The blue bar is a progress indicator that shows the status of
the print jet heating process .
NOTE: The blue bar is a progress indicator that illustrates the status
of the print .
NOTE: Select PAUSE to temporarily stop printing . Select CANCEL if
you wish to cancel the print job .
NOTE: Press the time at the bottom of the screen to view the
percentage of completion . Press it again to view how many layers
have been printed . After a few seconds, the default time will appear
again .
4 . Once the printer has finished printing, select the checkmark to continue .
NOTE: Once the print has completed, the print jets will begin to cool .
CAUTION: Do not touch the print jets until they have cooled to room
temperature .
3D Systems, Inc. 101