Printer Calibration; Print Jet Calibration; Network; System 1 - 3D Systems Cube User Manual

Printer Calibration

CALIBRATE
CALIBRATE is a utility that allows you to finely tune your gap settings. When Level
Gap, Auto Gap and Manual Gap have been successful but the bottom layer of your
print appears stringy and not tightly fused together, your printer should be calibrated .

Print Jet Calibration

PURGE JETS
PURGE JETS is a utility that enables you to test the extrusion functionality and can
assist in unblocking print jets .

Network

WIFI
Network
The screen provides a utility to connect the printer to a wireless network .
Wireless connections include:
• Wi-Fi
• Ad Hoc

System 1

TEST PRINT
TEST PRINT is a feature that allows you to perform a test print which is saved in the
printer . This Test Print is the same Welcome Message test print that is printed when
first setting up and activating your printer.
CUBE NAME
CUBE NAME
is a utility that allows you to change the name of your printer .

System 2

SELECT LANGUAGE
SELECT LANGUAGE allows you to localize the printer to your language .
LIGHT
The LIGHT icon allows you to turn on or off the system LEDs .
3D Systems, Inc. 24