Print Settings - 3D Systems cube User Manual

PRINT SETTINGS

Print Settings allow you to set the parameters of your print and build them into your print file. There are four (4) different options for
setting the print parameters .
Custom: Allows you to set the layer thickness, density, and fill pattern. You may also enable or disable supports and rafts.
Standard: A strong print that does not require fine details.
Premium: A strong print that requires fine details.
Draft: A print that does not require strength or fine details.
Layers
Density
Fill Pattern
Supports
Raft
3D Systems, Inc.
• 0 .070 mm
• 0 .200 mm
• Hollow
• Strong
• Almost Solid
• Honeycomb
• Diamonds
• Lines
• Supports are structures that are automatically printed under overhanging
parts of your model .
• Rafts are printed during the first few layers to help the model adhere to the
print pad .
48
High quality prints
Shorter print time
Short print times and low material use
Stronger prints
High material use and almost solid prints
Used for strong prints
For general printing
Shorter print time