3D Systems Cube User Manual page 14

4 . Fold the sides inward and remove the lower insert from the printer .
5 . Manually raise the print platform (A) and remove the spacer (B) from the printer .
6 . Open the accessories box and unpack the material cartridge(s)*, the USB mass
storage device, the power supply and cord, and the bottle of Cube Glue .
NOTE: Keep all packing materials for future repacking .
NOTE: *Depending on your configuration, you may receive 1 or 2
cartridges with your printer .
7 . Connect the power supply cable to the power inlet port (A) on the printer .
NOTE: Ensure the connection is secure . The cable should lock in
place . To remove the cable, pull back on the outer cable end and
carefully pull it out from the printer .
3D Systems, Inc. 10
A
B
A