3D Systems Cube User Manual page 80

4 . Apply two thin layers of Cube Glue to the print pad . Select the
continue .
NOTE: For best results, allow the glue to dry before printing .
NOTE: To ensure proper adhesion, the glue area should be larger
than the base of your printed creation .
NOTE: The print jets will heat to operating temperature .
NOTE: The printer will begin to print .
5 . When the printer has finished printing, select the
menu .
NOTE: Follow the steps in the section titled
3D Systems, Inc.
checkmark to
checkmark to go to the main
Finishing Your Creation .
76