3D Systems Cube User Manual page 87

4 . Select WIFI
NOTE: The printer will search for area networks .
5 . Using the up or down arrows, browse to your network name and select it .
NOTE: Connection to a network is confirmed by a checkmark to the
left of the network name . If the network is secured, a lock icon will
appear to the right of the network name .
NOTE: If your network requires a password, use the navigation
arrows to browse to the characters that make up your password and
select them . Select the
NOTE: The printer will attempt to connect to the network .
3D Systems, Inc.
checkmark to continue .
83