3D Systems Cube User Manual page 104

4 . Navigate to http://cubify .com/en/Cube/Activate . Select
5 . Extract the files to your computer.
6 . Navigate to the appropriate file and save it to the root directory (first level of your
file structure) of your USB mass storage device.
NOTE: The print file should correspond with the type of material
(PLA, ABS, etc .) currently installed in the printer .
7 . Insert the USB mass storage device into the printer's USB inlet port . Select
PRINT .
8 . Using the arrows, navigate to the file name of the calibration file. Select PRINT .
NOTE: The file name will appear at the top of the display.
9 . Apply two thin layers of Cube Glue to the center of the print pad . Select the
checkmark to continue .
NOTE: Apply enough glue to cover a square area of 3" (8 cm) .
NOTE: For best results, allow the glue to dry before printing .
3D Systems, Inc.
CALIBRATION FILES .
100