Starting And Stopping Camera Tracking With Eagleeye Director; Setting And Using Camera Presets - Polycom HDX Series User Manual

Starting and Stopping Camera Tracking with EagleEye Director

Setting and Using Camera Presets

Polycom, Inc.
If EagleEye Director tracking is enabled, the tracking camera follows the
person or people who are speaking. You can start and stop EagleEye Director
camera tracking.
To start camera tracking:
Touch Cameras on the Home screen or Call screen.
1
If the EagleEye Director is not currently selected, take the following steps:
2
Touch Select Cameras and select the EagleEye Director camera.
a
Touch Control Camera.
b
Select Start Camera Tracking.
3
To stop camera tracking:
>> Touch Cameras on the Home screen or Call screen and select Stop Camera
Tracking.
Camera tracking can also start or stop based on the following actions:
• Camera tracking starts automatically when you make a call.
• Camera tracking stops once you hang up a call.
• Camera tracking temporarily stops when you mute the HDX system. It
resumes when you unmute the HDX system.
Camera presets are stored camera positions that you can create ahead of time
or during a call. Presets allow you to:
• Automatically point a camera at pre-defined locations in a room.
• Select a video source such as a VCR or DVD player, a document camera,
or an auxiliary camera.
If your system's camera supports pan, tilt, and zoom movement, you can
create up to 10 preset camera positions for the near site camera. Each preset
stores the camera number, its zoom level, and the direction it points. These
presets remain in effect until you delete or change them.
If far-site camera control is allowed, you can create 10 presets for the far-site
camera. These presets are saved only for the duration of the call. You might
also be able to use presets that were created at the far site to control the far-site
camera.
User's Guide for Polycom HDX Systems and the Polycom Touch Control
11