Sartorius la series Operating Instructions Manual page 71

Preparation
Turn on the balance: Press e
> Sartorius logo is displayed
Select the Density application in the Setup menu: Press M
Select the Application menu:
Select: O soft key
Application 1
Select : Q or q soft key repeatedly
Density
Confirm : O soft key
Density
Select and confirm:
– :
Method
Density of liquid
or
Buoyancy
or
Displacement
Pycnometer
–
Liquid causing buoyancy
or
Water
or
Ethanol
User-definable
–
Decimals for disp. of vol./density
or
None
1 decimal place
2 decimals places
3 decimals places
4 decimals places
– :
Printout
or
None
All data
see also the "Application Menu (Overview)" in the chapter entitled
"Configuring the Balance"
Save settings and exit the Setup menu: Press the oo soft key
soft key
App
or
:
or
or
or
Operating the Balance
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric
– printing,
you can also access the following
functions from this application:
– calibration (not during alpha-
– toggling to the next application
– setup,
– turning off the balance.
Calibration/Adjustment
:
> See "Calibration/Adjustment"
Toggling to the Next Application
> See the section on the
Setup (setting parameters)
> See "Configuring the Balance"
Turning Off the Balance
> The balance shuts off
> The display goes blank,
input),
numeric input),
(e.g., checkweighing),
Press the soft key
Cal
for further instructions
Press D
corresponding application
program for further instructions
Press M
for further instructions
Press e
then OFF/Standby is displayed
with backlighting
71