Preparation
Turn on the balance: Press e
> Sartorius logo is displayed, self-test is performed
Select the Checkweighing application in the Setup menu: Press M
Select the Application menu:
Select
Application 2
Select
Checkweighing
Confirm
Checkweighing
Select and confirm:
–
Activation of port lines
Within checkweighing range
or
Always on
Stability and checkweighing range
or
At stability
Stability + checkwgh range -Oon
–
Type of checkweighing input
Target, minimum, maximum weight
Minimum, maximum weight
Target, minimum in %, maximum in %
–
Weight display mode
or
Absolute value
Difference from the target
–
Automatic printout of OK values
or
Yes
No
see also the "Application Menu (Overview)" in the chapter entitled
"Configuring the Balance"
Save settings and exit the Setup menu: Press the oo soft key
80
soft key
App
: Press the q soft key and then theO soft key
: Q or q soft key repeatedly
: O soft key
:
or
or
:
or
or
:
:
Additional Functions
In addition to the functions for:
– alphanumeric input, (not during
initialization),
– taring (not during alphanumeric
input)
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
Press the
soft key
Cal
> See "Calibration/Adjustment"
for further instructions
Toggling to Another Application
Press D
> See the section on the
corresponding application
program for further instructions
Setup (setting parameters)
Press M
> See "Configuring the Balance"
for further instructions
Turning Off the Balance
Press e
> The balance shuts off
> The display goes blank