Balance Operating Menu; Accessing The Balance Operating Menu And Changing The Settings - Sartorius Basic plus Service Manual

Balance Operating Menu

Accessing the Balance Operating Menu and Changing the Settings

Access the Menu » « »
- Switch the balance off and back on again by pressing
- While all segments are lighted in the display, briefly press
- "1" is displayed.
Note:
If " -1" is displayed, this indicates that the operating menu is blocked by the
menu access switch.
The menu access switch is located at the back of the balance
(see figure at the left).
In order to make changes in the menu code settings, move the switch to the
right.
Selecting a Code Setting »
- Press to select the desired number. Numbers increase by one with
each press and go from 9 back to 1 again (1, 2, 3 ... 8, 9, 1 .2..).
- Press to move from the first code number to the second and third
numbers (1st - 2nd - 3rd - 1st etc.).
Changing a Setting »
- Press to confirm the new setting. A " ° " appears after the new
setting, e.g., " 3-1-3° ".
SARTORIUS Basic
«
« » «
:
«:
plus
.
.
11