Sartorius la series Operating Instructions Manual page 52

Practical Example
Determining an Unknown Piece Count; Weighing in the Preset Reference Sample Quantity
Settings (changes in the factory settings required for this example):
Setup: App: Application 1: Counting: Average piece weight updating: Manual
Setup: App: Basic settings: Printout configuration: Autoprint upon initialization: On, all values
Step
1. Delete previous setting if necessary
2. Prepare a container for the
parts to be counted
3. Tare the balance
4. Place the reference sample quantity
on the balance (example: 10 pcs,
each weighing 2.148 g)
5. Determine the average piece
weight (number of decimal
places displayed depends on
the balance model)
6. If necessary, increase the number
of parts and perform reference
sample updating (example:
7 additional pieces)
7. Weigh uncounted parts
8. If desired, print total piece count
(here: 153 pcs)
52
Key (or instruction)
c
Place the empty container
on the balance
t
Place the displayed number
of parts in the container
soft key
Start
Place additional parts
in the container
soft key
Update
Place parts to be counted
in the container
p
Display/Output
nRef +
wRef + 2.14800 g
nRef +
wRef + 2.14800 g
Qnt +
10 pcs
17 pcs
153 pcs