Sartorius la series Operating Instructions Manual page 96

Practical Example
Totalize counted pieces and print out statistics
Settings (changes in the factory settings required for this example):
Setup: App: Application 1: Counting: Average piece weight updating: Manual
Setup: App: Application 3: Statistics: Evaluated values: Calculated
Setup: App: Application 3: Statistics: Evaluation mode, MR function: Final evaluation, display + print
Step
1. Turn on the balance and configure
the settings as indicated above
2. Delete old statistics data,
if necessary
3. Tare the balance
4. Toggle to Application 1: Counting
5. Place the displayed number of parts Place parts to be counted
on the balance (here: 10 pcs)
6. Initialize the Counting application
7. Remove the reference sample
quantity and toggle to Statistics
8. Place a number of parts on the
balance (here: 35 pcs)
96
Key (or instruction)
e
c
t
D
on the balance
soft key
Start
Unload the balance
D
Place parts on the balance
Display/Output
nRef
wRef 10.62600 g
10 pcs