Related Manuals for Sartorius L2200S
Summary of Contents for Sartorius L2200S
- Page 1 ® Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Sartorius Laboratory. L 610, L2200S, L2200P Electronic Precision Balances Installation and Operating Instructions...
- Page 2 Weighing pan Weight display ON/OFF key CAL key Tare control Menu access switch (for the balance operating program) Leveling foot (L 2200 S only) Power receptacle level indicator (L 2200 only)
- Page 3 Sartorius Laboratory L 610, L 2200 S, L 2200 P With this Sartorius Balance, you have acquired a sophisticated, high-quality electronic precision weighing Instrument that will help ease your daily work load. Please read these Installation and operating instructions care- fully before operating your new balance.
-
Page 4: Table Of Contents
Contents Equipment Supplied Installation Instructions Startup Operation Calibration Balance Operating Program Troubleshooting Guide Accessories Specifications... -
Page 5: Equipment Supplied
Do not miss out on the benefits of our warranty. Please complete the warranty registration card, indicating the date of installation, and return the card to your Sartorius dealer. The equipment supplied includes the components shown on the left and a dust cover. -
Page 6: Startup
Startup Attach the dust cover by pressing down on the adhesive disks, and mount the weighing pan (1) on the balance. Your balance is powered by an AC adapter. Please make sure that the voltage rating printed on this unit is identical to your lo- cal line voltage rating. -
Page 7: Operation
Operation The weight display provides the following special Status mes- sages for your information: BUSY The processor is still busy processing a function and will not ac- cept any other commands to perform functions at this time. STANDBY The display has been turned off with the ON/OFF key (3), and the balance is now in the STANDBY mode and ready to operate without warm u p. - Page 8 Press the ON/OFF key (3) to turn the display on or off. You can also turn it on with the tare control (5). After the balance has been plugged into the AC adapter, the weight display will go out whenever you turn oft the power with the ON/OFF key.
-
Page 9: Calibration
Calibration — This is only possible with an accurate calibration weight (L 610 - 500 g; L 2200 S, L 2200 P - 2,000 g). — See the "Accessories." Clear the pan and press the CAL key (4) for at least three sec- onds until the calibration weight readout appears in the display. -
Page 10: Balance Operating Program
Balance Operating Program The balance operating program lets you adapt your balance to various ambient conditions and to different weighing require- ments, and select the weight unit(s) commonly used in your country. At the factory, we have set the codes for a Standard program, which is protected by a locking function to prevent ac- cidental changes. - Page 11 After you have accessed the menu of the operating program, the display will show a continuous sequence of numbers from 0- 5 for the "page" or first digit of the code, in addition to the Status code letter "L" or "C." When the first digit of the code you wish to check or change ap- pears, press the tare control (5).
- Page 12 C 1 3 1 Page Line Word Menu of the Balance Operating Program (Active Parameters) Code Ambient Conditions Code Program Lock Very stable C 1 1 1 C 4 1 1 Stable C 1 1 2 C 4 1 2 Unstable C 1 1 3 Very unstable...
-
Page 13: Troubleshooting Guide
Troubleshooting Guide Problem ... Causes ... Remedy No segments appear in the weight - No line voltage available - Check power supply display (2) - The connecting cable of the - Plug in the cable power supply is not plugged into the balance Weight display shows “L”... -
Page 14: Accessories
Accessories (Options) Data printer, with date/time and statistics functions YDP02-OD Print speed, approx. lines/sec. Printer housing (W x D x H) in mm 150 x 138 x 43 Calibration weights for: L 420 D L 420 P (4 x 100 g) 7072 04 L 610 D (1 x 500 g) 7072 16... -
Page 15: Specifications
Specifications Model L 610 L 2200 S L 2200 P Weighing range 2220 400/800/2220 Readability 0,01 0,01 0,01/0,02/0,05 Tare range (by subtraction) -610 -2220 -2220 ≤± 0,005 ≤± 0,005 ≤± 0,01/0,01/0,025 Standard deviation ≤± 0,01 ≤± 0,015 ≤± 0,02/0,02/0,05 Max. linearity deviation Stabilization time (typical) Display update rate 0,1 ... - Page 16 All rights reserved. No part of this publication may be printed or translated in any form or by any means without the prior written permission of Sartorius AG. Sartorius AG reserves the right to make change to the technology, features, specification and design of the equipment without notice.