Preparation
Turn on the balance: Press e
> Sartorius logo is displayed, self-test is performed
Select the Formulation application program in the Setup menu: Press M
Select the Application menu:
Select
Application 3
Select
Formulation
Confirm
Formulation
Select and confirm:
–
Automatic storage
or
Off
On, first value at stability.
–
Minimum load for automatic storage
or
None
or
10 digits
or
20 digits
or
50 digits
or
100 digits
or
200 digits
or
500 digits
1000 digits
–
Source of data for auto storage
or
Application 1
Application 2
–
Evaluated values
or
Net
or
Calculated
Net + calculated
–
Evaluation mode, MR function
Intermediate eval., print
Final evaluation, print
–
Printout of individual components
or
No
Yes
see also the "Application Menu (Overview)" in the chapter entitled
"Configuring the Balance"
Save settings and exit the Setup menu: Press the oo soft key
soft key
App
: Press the q soft key twice and then press O
: Q or q soft key
: O soft key
:
:
:
:
or
Operating the Balance
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
> See "Calibration/Adjustment"
:
Toggling to Another Application
> See the section on the
Setup (setting parameters)
> See "Configuring the Balance"
Turning Off the Balance
> The balance shuts off
:
> The display goes blank,
alphanumeric input),
Press the
soft key
Cal
for further instructions
Press D
corresponding application
program for further instructions
Press M
for further instructions
Press e
then OFF/Standby is displayed
with backlighting
91