Table of Contents
Advertisement
Formulation
M
Purpose
With this application program you
can add weight values and
calculated values to a totalization
memory as components of a formula.
You can use the "Formulation"
application in combination with a
program chosen from Application 1
(except Recalculation) and one from
Application 2 (checkweighing, time-
controlled functions) as well as with
the extra functions.
Available Features
– Totalization of weight values and
calculated values
– Weigh in different components
to a total amount defined by
pressing the
soft key and
Nom
entering the value through the
numeric keys
– Simultaneous storage of net and
calculated values
– Optional configuration in the
Setup menu for loading weight
values and calculated values
either from Application 1 (e.g.,
counting, weighing in percent)
or from Application 2 (check-
weighing, time-controlled
functions)
– Totalization memory for up to
65535 values
– Transaction counter and current
total displayed in the text line
– Balance tared after a value
is stored
– Manual input of the number of
individual weighing operations
(target no. of operation
nDef
Result printed and memory
cleared after printout of
nDef
– Optional configuration in the
Setup menu to add the current
weight, with display accuracy,
to the current total by pressing
the
soft key and generating
M+
a printout of the result
90
– Optional configuration in the
Setup menu for stability-dependent
storage of the measured value:
Stability range
– Optional automatic storage of
measured values
Storage of measured value is
indicated by
Uu
indicates that you can place
zz
a load on the balance.
– Minimum load threshold for
automatic storage
– Press the
soft key to delete
M-
the last value added to the
totalization memory.
The transaction counter value
is reduced by one and a printout
is generated.
– Printout of an evaluation of results,
depending on the Application 1
or Application 2 parameters.
Configure the Setup menu to
define the information included
on this printout.
– Press the key identified by
(soft key) for a printout of an
intermediate evaluation after each
addition or a final evaluation
– A final evaluation is printed when
the formulation routine is ended
by pressing c, if no final
evaluation was generated by
pressing
MR
– Optional configuration in the
Setup menu to clear the
totalization memory and reset
the transaction counter by pressing
c or after an evaluation is
printed out
– Totalization data and transaction
counter data are stored in non-
volatile memory
– Continue formulation after turning
).
the balance off and back on
.
Factory Settings
Automatic storage:
Minimum load for automatic storage:
10 digits
Source of data for auto storage:
Application 1
.
Evaluated values:
Evaluation mode, MR key function:
Intermediate
evaluation, print
Printout of individual components:
Balance functions:
Stability range:
1-3-4 2 increments
Print in weighing mode.
Print on request, then tare: Off
Soft Key Functions
M+
MR
M-
MR
nDef
Nom
Printout of Formulation Report
When an intermediate or final
evaluation is printed out, all results
up to this point are included.
Comp2 + 42.38 g
Tot.cp+184.89 g
Comp2: Weight of the 2nd
Tot.cp:
Off
Net
On
Add weight values or
application values to the
total in the totalization
memory. The component
or transaction counter value
increases by one each time
you press this key.
Delete the last value added
to memory. The transaction
counter value decreases by
1. You cannot delete
previous values by
repeatedly pressing this key.
Print or display an inter-
mediate or final evaluation
Store the input number
of components
Press to enter target
component weight using
the numeric keys
component
Total of all components
Hide quick links:
Advertisement
Table of Contents
