Replacing The Transfer Belt Unit - Konica Minolta bizhub C203 Service Manual

Field Service Ver. 1.0 Jul. 2007
3.5.16

Replacing the transfer belt unit

A. Periodically replacing parts/cycle
• Transfer belt unit: Every 150,000 prints
B. Removal procedure
1. Open the right door.
[1]
[1]
[2]
A02EF2C029DA
[1]
A02EF2C030DA
[2]
[1]
A02EF2C031DA
3. Periodical check
2. Remove two screws [1] and release
the lock of the transfer belt unit [2].
3. Hold the both sides and lift it to take
out the transfer belt unit [1] a little.
4. Hold the position [1] as shown in the
left and remove the transfer belt unit
[2].
NOTE
• Do not touch the surface of the
Image transfer belt unit.
• Cover the image transfer belt unit
with something such shade cloth to
protect its surface from dust or for-
eign matter.
43