Konica Minolta bizhub C203 Service Manual page 347

8. Utility Mode
(6) Line Monitor Sound
Functions
• To set whether to output the line monitor sound from the speaker or not.
Use
Setting/ • The default setting is ON.
Procedure
(7) Line Monitor Sound Vol.
Functions • To set the volume of the speaker.
Use • To change the volume of the speaker.
Setting/
• Change the volume by touching the [Lower] or [Higher].
Procedure
D. TX/RX Settings
(1) Duplex Print (RX)
• It will not be displayed when [Print Separate Fax Pages] is set to "ON."
Functions • To set whether to carry out the duplex print for the received original when receiving
fax.
Use • To carry out the duplex print for the received original.
Setting/ • The default setting is OFF.
Procedure
(2) Letter/Ledger over A4/A3
Functions • To set weather to use the inch paper priority when receiving fax.
Use • To use the inch paper priority when receiving fax.
Setting/
Procedure
NOTE
• The default setting is different depending on the country.
(3) Print Paper Selection
Functions • To set the priority for paper feed tray when receiving fax.
Use • To change the priority for paper feed tray when receiving fax.
Auto select
Priority Size : Printed on size with priority. When the size is not set, it will be
Fixed Size
Setting/ • The default setting is Auto Select.
Procedure
302
"ON"
ON
ON
: Selected automatically
printed on the closest size.
: Printed only on the fixed size.
"Auto Select"
Field Service Ver. 1.0 Jul. 2007
OFF
"OFF"
OFF
Fixed Size Priority Size