Konica Minolta bizhub C203 Service Manual page 523

16. Malfunction code
Code Item
C6F01 Scanner sequence
trouble 1
C6F02 Reserved
C6F03 Reserved
C6F04 Reserved
C6F05 Reserved
C6F06 Reserved
C6F07 Reserved
C6F08 Reserved
C6F09 Reserved
C6F10 Reserved
C6FDC Reserved
C8101 Before reading pressure
welding alienation
mechanism
C8102 Turn around pressure
welding alienation trouble
C8103 Lift up mechanism trouble
C8104 Glass movement trouble
C8105 Undetectable
C8302 Read cooling fan trouble
C9401 Exposure turning on the
lamp trouble detection
C9402 Exposure turning on the
lamp abnormally
detection
CA051 Standard controller
configuration failure
CA052 Controller hardware error • A controller hardware error is detected in
CA053 Controller start failure
478
Detection timing
• The original transport interval becomes
shorter than the designed value due to an
original transport control error in original
reading in ADF.
See P.58 of the DF-611 service manual.
See P.58 of the DF-611 service manual.
• The output from the CCD sensor is a prede-
termined value or less during CCD sensor
gain adjustment.
• The average output value of the CCD sen-
sor with the scanner at its standby position
is a predetermined value or more at the end
of a scan job.
• The controller of the printer control board
(PRCB) is faulty.
the network I/F.
• A controller start failure is detected in the
controller interface.
Field Service Ver. 1.0 Jul. 2007
Trouble iso-
lation com-
pliant unit
Scanner
⎯
⎯
⎯
⎯
⎯
Scanner
Scanner
⎯
⎯
⎯
Rank
C
B
B
B
B
B
A
A
C
C
C