Konica Minolta bizhub C203 Service Manual page 356

Field Service Ver. 1.0 Jul. 2007
<Number of Rx Call Rings>
Functions • To set the number of RX call rings for the expanded line.
Use • To change the number of artificial ringback tones with expanded line when receiving
calls until it starts receiving operation.
Setting/ • The default setting is 2 X.
Procedure
<Line Monitor Sound>
Functions
• To set whether or not to output the line monitor sound of the expanded line from the
speaker.
Use
Setting/ • The default setting is ON.
Procedure
(2) Function Settings
<PC-FAX TX Setting>
• This setting does not appear when "RX Only" is selected for [Multi Line Settings].
Functions • To set the number of the line used for PC-FAX transmission.
Use • To use when specifying the line to be used for PC-FAX transmission when using the
expanded line.
Setting/ • The default setting is No Selection.
Procedure
(3) Multi Lines Setting
Functions • To set the system for using each line when using more than one line.
Use • To use when setting the system for using each line when using more than one line.
Setting/ <Multi Line Usage>
Procedure • When selecting [Normal], perform the transmission setting for Line 2.
<Line 2 Setting>
• The default setting is TX and RX.
(4) Sender Fax No.
Functions • To register the fax ID when using the additional line.
Use • To register the fax ID (for additional line).
Setting/
• Use 10-key pad or [+] / [space], enter the fax ID (up to 20 characters).
Procedure
"ON"
"No Selection"
"TX and RX"
"2 X" (0 to 15)
OFF
Line 1
RX Only
8. Utility Mode
Line 2
TX Only
311