Replacing The Image Transfer Belt Unit - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 1.0 Jul. 2005
3.6.2

Replacing the Image Transfer Belt Unit

A. Removal Procedure
1. Open the Front Door and turn OFF the Main Power Switch.
2. Remove the Waste toner Box
☞ 27
3. Slide out the Imaging Unit (C/M/Y/K).
☞
NOTE
• After the Imaging Unit has been removed from the main unit, be sure to place it in
the plastic bag (black) or wrap it in a light shielding cloth, and store it in a dark
place.
Do not leave the Imaging Unit exposed to light for a extended period of time, as it
may become damaged.
[3]
[2]
[1]
4038F2C023DA
4038F2C024DA
3. Periodical check
4. Open the Right Door.
5. Remove two Screws [1] and release
the Lock of the Image Transfer Belt
Unit [2].
6. Hold the both sides and lift it to take
out the Image Transfer Belt Unit [3] a
little.
31