Konica Minolta bizhub C203 Service Manual page 381

10. Service Mode
10.3 Date/Time Input mode
• This mode is used to set time-of-day and date.
10.3.1 Date & Time Setting mode screen
A. Date & Time Setting mode setting procedure
1. Call the Service Mode to the screen.
2. Press the following keys in this order.
Stop → 1 → 1 → 4 → 4 → Clear
3. Enter year, month, day, hour, and minute, in that order, from 10-key pad.
(Year 4 digits → Month 2 digits → Day 2 digits → Hour 2 digits → Minute 2 digits)
NOTE
• When setting the month, day, hour, or minute, enter "0" first if the data one digit.
4. Make sure that correct figures have been entered and then touch [Entry].
5. Touch [END] to return to the Service Mode.
336
Field Service Ver. 1.0 Jul. 2007
A00JF3E537DA