Konica Minolta bizhub C203 Service Manual page 982

Field Service Ver. 1.0 Jul. 2007
Exit direction
Exit direction
13. Touch [END].
14. Make another copy, and check the deviation.
15. Touch [Exit] on the Service Mode screen.
16. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
• If the fold is offset as shown on the left.
11. Touch [-] and set the appropriate
A
numeric value.
Adjustment range: 0 to -10
(1 increment 0.5 mm)
4511F3C505DA
• If the fold is offset as shown on the left.
12. Touch [+] and set the appropriate
A
numeric value.
Adjustment range: 0 to +10
(1 increment 0.5 mm)
4511F3C506DA
6. Finisher operations
31