Konica Minolta bizhub C203 Service Manual page 468

Field Service Ver. 1.0 Jul. 2007
C. URL
Functions
• To register the address and directory of the program server where the firmware is to
be stored in URL.
Use
Setting/ 1. Select [URL].
Procedure 2. Enter the URL (up to 256 one-byte characters) on the on-screen keyboard.
NOTE
• Enter the URL which format suits the protocol to be used.
When connecting to http http:// (Host name or IP address)/ directory name or
https:// (Host name or IP address)/directory name.
When connecting to ftp ftp:// (Host name or IP address) / directory name.
D. FileName
Functions
• To register the file name of the firmware data to be downloaded.
Use
Setting/ 1. Select [FileName].
Procedure 2. Enter the file name (up to 63 one-byte characters) on the on-screen keyboard.
10.17.5 Download
Functions • Access the program server according to the Internet ISW setting, and download the
firmware.
Use • To use when updating the firmware via network.
Setting/ 1. Select [Download].
Procedure 2. Touch [ISW Start] to start downloading the firmware.
3. The message to show the status will be displayed on the screen while connecting
and transferring data.
NOTE
• When it failed to connect to the program server, or failed to download, the
error code and the message will be displayed. Check the cause of the error by
the error code, and follow the message for resetting.
Refer to "Error cord list" for the error codes.
See P.74
4. When the firmware is normally upgraded, the main body will automatically be
restarted to complete the Internet ISW.
10. Service Mode
423